Computerized Whole Garment Making Flat Knitting Machine

Knitting width

72,80 Inch

Knitting system

WHOLE GARMENT SYSTEM

Knitting speed

Controlled by servo-motor with 128sections optional,   max speed reach 1.6m/s.

Knitting function

Pointelle, tuck, intarsia, needle, all kinds of jacquard,   apparent shape, open needle, hidden shape and so on.

Racking

Controlled by servo-motor racking within 2 inches   and with fine adjusting function. Transfer and knit occurs synchronous, more   efficient.

Stitch density

Controlled by stepping motor, 128 section stitch   select-able adjustable scope supported by subdivision technology:0-650 the   stitch of the knitwear can be accurately controlled.

Dynamic stitch

Using high speed stepping motor, multi-stitch   function can be achieved in one line.

Needle selection

Advanced encoder reading pin.8-stage selecting   needle setup composed of special electromagnet is regarded as efficient full   width jacquard needle selector, which can be installed or removed simply from   the carriage and maintained easily.

Transfer system

Combined design, single or double cam system all cam   transfer together or separately. Also one can do transfer, another cam system   for knitting, which will achieve high production.

Quickly turning

Intelligent switching braiding system improves   machine weaving efficiency.

Take-down system

The transverse tension and front and rear bed are   separately controlled. It can realize the independent control of a variety of   pulling forces and front and rear beds in one line, and meet the pulling   force requirements of different organizations. It is a necessary   configuration for whole garment.

Color-changing system

2x8 yarn feeders on each side of 4 guide rails,   shift able on any needle position; Motorized Feeder (Optional).

Yarn feeder device

Accurately control the tension of the yarn and   ensure the consistency of the whole woven piece quality.

Protection system

The machine will automatically alarm if   yarn-breaking, knots, floating yarn, rewind, end of knitting, fail of racking,   needle breakage, error programming occur, also set up the safety auto-lock   protect device.

Control system

1. LCD industrial display, can display various   parameters, which can be adjustable during operation.

2.USB memory interface, System memory 2G.

3.Free design system is visual and easy to   understand and software upgrade free of charge.

4.Support multi-language operation as Chinese and   English, Spanish, Russian etc.

Network function

Automatic refueling: Control the refueling time and   frequency by setting the time. The oil pump lubricate the jack and long jack   needle on the needle bed automatically to reduce the wear of the machine and   increase its service life.

Power supply

Single-phase 220V/three-phase 380V,adopt advanced   CMOS technology, having memorizing function at power shock stop.

Non waste yarn Comb device

The device equipped with 2 clips and 1 scissors on   both sides, High precision step motor is used for wire feeding, and servo   motor is used to control up and down.

Volume and weight

3500*1000*1800mm,1450kgs(72inch);3700*1000*1800mm,1500kgs(80inch)

Sinker system

Controlled by stepping motor, adjustable to   different knitwear, up to be various results of shaping and patterns.

Reducing device

Automatic refueling: Control the refueling time and   frequency by setting the time. The oil pump lubricate the jack and long jack   needle on the needle bed automatically to reduce the wear of the machine and   increase its service life.